Casio Privia PX-S3100, User Manual

Page: 28 / 96

EN-27
Digital Piano Operations
■
To initialize all parameter settings that can be
configured with knob operations
• The procedure below returns all parameter settings in the
“ Knob Set List ” (page EN-78 ) to the Digital Piano’s initial
defaults.
1.
Use the bp
^
button to cycle through settings
until the “
^
CTRL” indicator to the right of the
button is lit.
2.
Hold down the bs
KNOB
button until “Sure?”
appears on the display.
3.
To initialize, touch bl
+
. To exit this operation
without initializing, touch bk
–
.
You can use the pitch bend wheel to slide the pitch
of notes smoothly upwards and downwards. This
capability makes it possible to reproduce
saxophone and electric guitar choking effects.
1.
While playing a note on the keyboard,
rotate the
cn
PITCH BEND
wheel on
the left of the keyboard upwards or
downwards.
The amount the note bends depends on how
much you rotate the pitch bend wheel.
• Do not touch the wheel as you turn on the
keyboard.
• You can use FUNCTION parameter 53 (“P Bend Range”) to
specify the amount of pitch change at maximum rotation in
either direction. For information about FUNCTION
parameters, see “
Configuring Function Settings
(FUNCTION Mode) ” (page EN-53 ).
With the arpeggiator, you can play various arpeggios and
other phrases automatically by simply pressing keys on the
keyboard. You can select from a number of different arpeggio
options, including playing arpeggios from a chord, playing
various phrases automatically, and more.
• A single button is used to control the arpeggiator and auto
harmonize (page EN-37 ). Because of this, auto harmonize
cannot be used while the arpeggiator is in use.
■
To enable the arpeggiator
• If “AH” appears instead of “AR” when you touch the
bt
ARPEG.
button in step 2 of the procedure below,
you will need to change the function assigned to the
bt
ARPEG.
button. Select “Arpeggiator” for
FUNCTION parameter 79 (“Type Select”). For
information about FUNCTION parameters, see
“
Configuring Function Settings (FUNCTION Mode) ”
(page EN-53 ).
1.
Use the
bp
^
button to cycle through settings
until the “
^
CTRL” indicator to the right of the
button is lit.
2.
To enable the arpeggiator, touch
bt
ARPEG.
This will cause “AR” to appear on the display.
• Playing a chord or single note on the keyboard will
play back the currently selected arpeggio.
Using the Pitch Bend Wheel
Using the Arpeggiator
[ C T R L ] K N OB
T : 1 2 0 A R
0 1 : F i l t e r