manualshive.com logo in svg

Casio Privia PX-S3000, User Manual

The Casio Privia PX-S3000 Connection Manual is a comprehensive guide to help you seamlessly connect your keyboard to various devices. This essential manual can be easily downloaded for free from manualshive.com, providing you with step-by-step instructions and troubleshooting tips to enhance your musical experience.

Share
Download
background image

EN-61

USB Flash Drive

• Be sure to observe the precautions provided in the 

documentation that comes with the USB flash drive.

• Avoid using a USB flash drive under the conditions 

below. Such conditions can corrupt data stored on the 
USB flash drive.
− Areas subjected to high temperature, high humidity, 

or corrosive gas

− Areas subjected to strong electrostatic charge and 

digital noise

• Never remove the USB flash drive while data is being 

written to or loaded from it. Doing so can corrupt the 
data on the USB flash drive and damage the USB flash 
drive port.

• Never insert anything besides a USB flash drive into 

the USB flash drive port. Doing so creates the risk of 
malfunction.

• A USB flash drive can become warm after very long 

use. This is normal and does not indicate malfunction.

• Static electricity conducted to the USB flash drive port 

from your hand or from a USB flash drive can cause 
malfunction of the Digital Piano. If this happens, turn 
the Digital Piano off and then back on again.

• Never plug any other device besides a USB flash drive 

into the USB flash drive port.

• When you perform a USB flash drive operation or turn 

on the Digital Piano while a USB flash drive is plugged 
in, the Digital Piano initially needs to perform a 
“mounting” sequence to prepare for data exchange 
with the USB flash drive. Digital Piano operations may 
be momentarily disabled while a mounting sequence is 
being performed. The message “MOUNTING” is 
displayed while the USB flash drive is being mounted. 
It may take up to 10 or 20 seconds or even longer for a 
USB flash drive to be mounted. Do not attempt to 
perform any operation on the Digital Piano while a 
mounting sequence is in progress. A USB flash drive 
needs to be mounted each time it is connected to the 
Digital Piano.

• Mounting a USB flash drive on the Digital Piano will create 

a folder named MUSICDAT in the drive’s root directory if a 
MUSICDAT folder does not already exist there. Use this 
folder when exchanging data between the Digital Piano and 
USB flash drive.

■

To connect a USB flash drive

1.

As shown in the illustration below, insert the 
USB flash drive into the Digital Piano’s 

cq

USB

 

flash drive port.

• Carefully push the USB flash drive in as far as it will 

go. Do not use undue force when inserting the USB 
flash drive.

■

To disconnect a USB flash drive

1.

After checking to make sure that the message 
“MOUNTING” or “Wait” is not on the display 
(indicating a read or write operation being 
performed), pull the USB flash drive straight 
out of the USB flash drive port.

USB Flash Drive and USB Flash 
Drive Port Handling Precautions

Copyrights

You are allowed to use recordings for your own personal 
use. Any reproduction of an audio or music format file, 
without the permission of its copyright holder, is strictly 
prohibited under copyright laws and international 
treaties. Also, making such files available on the Internet 
or distributing them to third parties, regardless of 
whether such activities are conducted with or without 
compensation, is strictly prohibited under copyright laws 
and international treaties. CASIO COMPUTER CO., 
LTD. shall not be held in any way liable for any use of 
this Digital Piano that is illegal under copyright laws.

Connecting a USB Flash Drive to 
and Detaching It from the Digital 
Piano

cq

USB

 flash drive port

USB flash drive

Summary of Contents for Privia PX-S3000































































































Reviews:

No comments

Related manuals for Privia PX-S3000

Vanguard Instruments II Series Operating Instructions Manual preview
II Series
Brand: Vanguard Instruments Pages: 24
Harley Benton ST Style User Manual preview
ST Style
Brand: Harley Benton Pages: 28
Laney TFX3 Service Information preview
TFX3
Brand: Laney Pages: 7
Laney LX15 User Manual preview
LX15
Brand: Laney Pages: 24
Laney EA120 User Manual preview
EA120
Brand: Laney Pages: 6
Van Walt CT12 Operating Instructions Manual preview
CT12
Brand: Van Walt Pages: 12
Keithley 610C Instruction Manual preview
610C
Brand: Keithley Pages: 44
Keithley 2651A User Manual preview
2651A
Brand: Keithley Pages: 76
Keithley 4200-SCS Startup Manual preview
4200-SCS
Brand: Keithley Pages: 12
Keithley 194 Instruction Manual preview
194
Brand: Keithley Pages: 281
CAS Corporation TW-100 Service Manual preview
TW-100
Brand: CAS Corporation Pages: 20
Marshall Amplification Valvestate VS230R Handbook preview
Valvestate VS230R
Brand: Marshall Amplification Pages: 7
Scaletron AccuPro-5000 Operator'S Manual preview
AccuPro-5000
Brand: Scaletron Pages: 63
LaserLiner 4K5 RA 800 Manual preview
4K5 RA 800
Brand: LaserLiner Pages: 52
SEAWARD Electronic Rigel 266 Plus Instruction Manual preview
Rigel 266 Plus
Brand: SEAWARD Electronic Pages: 57
Endress+Hauser Proline Promag 50H Manual preview
Proline Promag 50H
Brand: Endress+Hauser Pages: 52
Vanguard Instruments TRM-20 User Manual preview
TRM-20
Brand: Vanguard Instruments Pages: 85
INTERSPIRO Divator Pro User Manual preview
Divator Pro
Brand: INTERSPIRO Pages: 76

Brands by name

Popular brands

Load more brands