Casio PRIVIA PX-130, Service Manual & Parts Manual, Page: 26 / 62

– 24 –
<Installing the hammers>
Be sure to install each hammer at its designated location. If a hammer does not move smoothly, check
if it is installed at the correct location.
Follow the same procedures shown below to install a hammer for both black and white keys.
1. Use the tweezers to set a hammer at its correct location.
2. Press the chassis with the tip of tweezers.
3. Using the chassis-tweezers contact as a fulcrum point, press down the metal part of the hammer in
the direction of the red arrow in the illustration below, and then install the hammer.
NOTE: When installing, do not damage the felt.
Be careful not to damage the felt.
Press down against the metal part.
Tweezers
Fulcrum point
Locked at this point