20
21
Connecting with the USB Cable (Computer Only)
Important!
• Do not connect the printer to a computer that does not have LABEL DESIGN MAKER
installed. Install LABEL DESIGN MAKER first and then connect.
To connect
1.
Start up the computer and then connect the
supplied USB cable to a USB port on the
computer.
Important!
• Be sure to plug the cable directly into the computer’s USB port. Proper operation is
not guaranteed when the cable is connected to a USB port of another device.
Compatibility issues may result in the printer not being recognized by your computer
when you connect to one of its USB ports. If this happens, try changing to a
different computer USB port.
2.
Plug the AC adaptor plug into the AC adaptor
connection terminal of the printer.
3.
Connect the power cord to the AC adaptor.
4.
Plug the power cord into a household power
outlet.
Important!
• Be sure to plug the power cord into a
normal household power outlet.
• Use only the AC adaptor specified for this
printer.
• Do not use the power cord that comes with
the printer with any other device.
5.
On the printer, press
to turn on power.
1
2
3
4
