179
3.15
Use the Country-Specific WLAN Setting Tool
3.15.1
Function Summary
The Country-Specific WLAN Setting Tool loads usable WLAN channels to the IT-G500 unit.
The channels available for use are set for each country, and this function sets a frequency that can
be used in the country concerned.
Function
- Sets country-specific WLAN setting values on the terminal
- Reads the country-specific WLAN setting values that are set on the terminal, and displays them on
the screen
Subjects
The module configuration and compatible models are as shown below.
Compatible models
IT-G500 (OS: Windows Embedded Handheld 6.5)
Module
configuration
*
(1) Configuration module: SetCtryITG500.exe
(2) Configuration file: SetCtryITG500.ini
* The configuration module (exe) and configuration file (ini) comprise a set. The ini file is different in
each country, but the exe is common to all. The name of the configuration module (exe) without
the extension is the same as that of the configuration file (ini) without the extension.
Startup method
This tool starts in the following way: This tool may be placed in any folder, but the configuration
module (exe) and the configuration file (ini) must be in the same folder.
(1) Manual start from Windows Explorer
Double tap on the configuration module (exe) displayed in Windows Explorer.
(2) Start from the kitting tool
Start the configuration module (exe) from the kitting tool created by the distributor, or from a batch
file, etc.
The command line arguments described later can be used.
