Operation Guide ID-15S
1
MA1205-EA
ILLUSTRATION
© 2012 CASIO COMPUTER CO., LTD.
1cm
ALM/SNZ
DEMO
MAX/MIN
ON
OFF
RESET SET
C/ F
SNZ
ALM/SNZ
DEMO
MAX/MIN
ON
OFF
RESET SET
SNZ
ALM/SNZ
DEMO
MAX/MIN
ON
OFF
RESET SET
C/ F
SNZ
ALM/SNZ
DEMO
MAX/MIN
ON
OFF
RESET SET
C/ F
SNZ
•
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes,
seconds)
Day of the week
Current temperature
Date
(month - day)
PM
indicator
Alarm time
Alarm on
indicator
Snooze on
indicator
Alarm Off
Snooze Alarm On
GENERAL GUIDE
1
1
1
1
1
ALM/SNZ button
Pressing this button while the alarm is sounding stops the alarm.
2
2
2
2
2
DEMO button
Press this button to test the alarm sound.
3
3
3
3
3
Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
4
4
4
4
4
MAX/MIN button
Press this button to display the high and low temperature values.
5
5
5
5
5
°
C/
°
F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
6
6
6
6
6
+ / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
7
7
7
7
7
RESET button
Press this button to reset the clock after replacing its batteries.
8
8
8
8
8
SET button
Use this button when setting the current time.
USING THE CLOCK
1. Press the
SET
button (
8
) to cycle through the setting screens as shown below.
12-hour/24-hour
Setting Screen
Time Setting Screen
Month and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen
Contrast Setting Screen
2. While the screen you want is displayed, use the
+
and
–
buttons (
6
) to change the flashing digits.
•
Holding down
+
or
–
changes the flashing digits at
high speed.
•
You can set the year in the range of 2000 to 2099.
The day of the week is set automatically in
accordance with the date setting.
•
Pressing
+
or
–
while the Time Setting Screen is on
the display causes the seconds count to be reset to
00.
•
Each press of
+
or
–
while the 12-hour/24-hour
Setting Screen is on the display toggles between
12-hour and 24-hour timekeeping.
•
You can set the contrast level in the range of 1 to 10.
3. After making the settings you want, use the
SET
button (
8
) to display the Normal Timekeeping Screen.
•
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
ALM/SNZ
DEMO
MAX/MIN
ON
OFF
RESET SET
C/ F
SNZ
Press
–
to
decrease
the flashing
digits.
Press
+
to
increase
the flashing
digits.
