35
Recording Images
Prerecord CS records a group of images that consists of what occurred before
[
r
/SLOW] is pressed, followed by images recorded in real-time.
1.
Select “Prerecord (Still image)” for the recording mode.
2.
Touch “SET”.
3.
Touch an item and then change its setting.
4.
When the setting is the way you want, touch
.
5.
Point the camera at the subject.
6.
Press [
r
/SLOW] or touch “Pre REC”.
This starts Prerecord CS recording, which repeats for the number of times
specified by the setting. This starts pre-recording of a set of constantly updated
images. To stop Prerecord CS pre-recording, touch
.
7.
Press [
r
/SLOW] again.
This saves the pre-recorded images along with new real-time recorded images.
Shooting with Prerecord CS
High Speed CS
fps
Specifies the CS shooting speed.
10fps (10 frames per second), 15fps (15 frames per
second), 30fps (30 frames per second)
Maximum CS
Shots
Specifies the number of images shot by a single High
Speed CS operation.
5, 10, 20, 30
Pre-record CS
Shots
Number of images of the action that occurred before
[
r
/SLOW] is pressed.
3, 5, 10, 15, 20, 25
