Casio GEC-10 User Manual Download Page 18

Page: 18 / 99

Quick Start Basics

Operation Lamp Indications

While power is off

While power is on

IMPORTANT!

• The first time you connect the controller to your computer with the USB cable, an

error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.

• A battery that has not been used for a long time, certain types of computers, and

connection conditions can cause charging to take longer than normal. These
conditions may also cause the operation lamp to flash red. If this happens, refer to
page 84.

• Charging is not performed while the connected computer is in the hibernate mode.

Operation Lamp Status

Meaning

Lit red

Charging

Flashing red

Charging stopped due to abnormal internal
temperature, USB-AC adaptor problem, battery
problem (page 84), timer operation.

Unlit

Charging complete

Operation Lamp Status

Meaning

Lit amber

Charging

Slow red-amber flashing

Charging (sleep state)

High-speed green-amber
flashing

Charging stopped due to abnormal internal
temperature, USB-AC adaptor problem, battery
problem (page 84), timer operation.

High-speed red-green flashing

Same as above (sleep state)

Lit green

Charging complete

Slow green flashing

Charging complete (sleep state)

Summary of Contents for GEC-10




































































































Search results

Summary of Contents for GEC-10

Reviews:

Brands by name

Popular brands

Casio GEC-10, User Manual

Search results

Summary of Contents for GEC-10

Reviews:

Brands by name

Popular brands