97
Other Settings (Set Up)
Procedure
[MENU]
*
“Set Up” Tab
*
Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “
O
Tracking”
– During Voice Recording playback or recording
– During movie recording and playback
Procedure
[MENU]
*
“Set Up” Tab
*
Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
• An optionally available AV cable (EMC-7A) is required for video output.
Configuring Auto Power Settings (Auto Power Off)
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
NTSC
Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
TV screen aspect ratio of 4:3
16:9
Wide screen aspect ratio
