63
Snapshot Tutorial
Use the procedure below to reposition the motion detection area
(Start self-timer
icon) as required when it (or the preview icon
) hinders your view of the display
image.
1.
In the REC mode, press [MENU].
2.
Press [
4
], use [
8
] and [
2
] to select the
“
r
REC MENU” tab, and then press [
6
].
3.
Use [
8
] and [
2
] to select “Motion Position”
and then press [SET].
4.
Press [MODE].
• This will select one of the two icons on the
display. Pressing [MODE] toggles the selection
between the start self-timer icon and the preview icon.
5.
Use [
8
], [
2
], [
4
], and [
6
] to reposition the currently selected icon.
6.
Press [MODE] to select the other icon if you want, and reposition it
using the same operation as step 5.
7.
When the icons are located where you want, press [SET].
Repositioning the Motion Detection Area (Motion Position)
Start self-timer icon
Preview icon
