Casio EX-S770BE User Manual Download

Page: 62 / 290

GETTING READY

Extra Batteries

Taking along extra fully charged batteries (NP-20) is

recommended while on a trip in order to avoid not being able to

shoot images due to the battery going dead.

Using the Camera in another Country

Note the following precautions.

•

The bundled AC adaptor is designed for operation with any

power supply in the range of 100 V to 240 V AC, 50/60 Hz.

This means the AC adaptor can be used in various countries

around the world. Note, however, that there may be some

problems with the AC power cord withstand voltage and with

the configuration of power outlet shapes in certain geographic

areas. Before trying to use the AC adaptor in another country,

be sure to check with your travel agent concerning the local

power supply.

•

Do not use a voltage adaptor with this camera.

Using the Camera on a Trip

Summary of Contents for EX-S770BE



































































































































































































































































































Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands

Casio EX-S770BE, User Manual

Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands