Casio EX-S770BE User Manual Download

Page: 203 / 290

203

PRINTING

Connect the USB cable that comes bundled
with the camera to the USB cradle and your
printer’s USB port.

•

Also, connect the AC adaptor to the cradle and plug the

adaptor into an electrical outlet.

•

If you do not plan to use the AC adaptor, make sure that

the camera’s battery is fully charged.

•

Nothing appears on the camera’s monitor screen if the

camera is on the USB cradle while the bundled AV cable

is connected to the cradle. Be sure to disconnect the AV

cable from the cradle if you want to use the camera’s

monitor screen to view images.

Turn off the camera and place it onto the USB
cradle.

Turn on the printer.

Load paper into the printer.

Press the USB
cradle’s [USB] button.

This displays a print menu

on the camera’s monitor

screen.

USB Port

USB Cable (Bundled)

Connector B

Connector A

[

] (USB) Connector

Summary of Contents for EX-S770BE



































































































































































































































































































Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands

Casio EX-S770BE, User Manual

Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands