Casio EX-S770BE User Manual Download

Page: 151 / 290

151

VIEWING SNAPSHOTS AND MOVIES

Use the procedure below to view snapshots and movies on a TV

screen.

•

You need to use the USB cradle and the AV cable that comes

with the camera to connect to a TV.

Connect the USB cradle to a TV.

Turn off the camera and place it onto the USB
cradle.

Turn on the TV and select its video input
mode.

If the TV has more than one video input, select the one

where the USB cradle is connected.

Press [

] to turn on the camera and enter the

PLAY mode.

Pressing [ON/OFF] or [

] will not turn on the camera.

When the camera turns on in the PLAY mode, an image will

appear on the TV screen. The camera’s monitor screen will

not turn on.

Now you can perform the applicable operation
on the camera for the type of file you want to
play.

•

At this point you could press the USB cradle’s [PHOTO]

button to start a slideshow (page 150).

Viewing Camera Images on a TV

Yellow

VIDEO IN Jack (Yellow)

White

AUDIO IN Jacks (White)

AV Cable

[AV OUT] (AV output port)

Video

Audio

Summary of Contents for EX-S770BE



































































































































































































































































































Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands

Casio EX-S770BE, User Manual

Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands