99
Other Playback Functions (PLAY)
Procedure
[
p
] (PLAY)
*
Snapshot Screen
*
[SET]
*
MENU
*
PLAY Tab
*
Dubbing
2.
Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone
with your fingers while recording.
• Good recording results are not possible when the camera is
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• You cannot add audio to an image that is protected.
• To delete audio, perform the following operation:
Dubbing
*
Delete
*
[SET]
*
[AUTO].
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
1.
In the PLAY mode, use [
4
] and [
6
] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a
ˆ
icon.
2.
Press [
0
] (Movie) to start playback.
Adding Audio to a Snapshot (Dubbing)
You can add audio to a snapshot after you shoot it.
You can re-record a snapshot’s audio whenever you
want. You can record up to about 30 seconds of audio
for a single snapshot.
1.
Press [SET] to start audio recording.
Remaining recording time
To play snapshot audio
Microphone
