manualshive.com logo in svg

Casio EX S12 - EXILIM CARD Digital Camera, User Manual

The Casio EX S12 - EXILIM CARD Digital Camera is a sleek and compact device that allows you to capture high-quality images on the go. With its user-friendly interface, you can easily navigate through its features and settings. To fully utilize this camera's capabilities, make sure to download the free user manual from manualshive.com.

Share
Download
background image

168

Appendix

.

Data Error Precautions

Your digital camera is manufactured using precision digital components. Any of the 
following creates the risk of corruption of data in camera memory.

– Removing the battery or memory card while the camera is performing some 

operation

– Removing the battery or memory card while the back lamp is flashing green after 

turning off the camera

– Disconnecting the USB cable while communication is in progress
– Using a battery that is low
– Other abnormal operations

Any of the above conditions can cause an error message to appear on the monitor 
screen (page 185). Perform the action indicated by the message that appears.

.

Operating Environment

• Operating Temperature: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.

– In an area exposed to direct sunlight, or large amounts of moisture, dust, or 

sand.

– Near an air conditioner or in other areas subjected to extreme temperature or 

humidity

– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration

.

Condensation

Sudden and extreme temperature changes, such as when the camera is moved from 
the outdoors on a cold winter day into a warm room, can cause water droplets called 
“condensation” to form on the interior and the exterior of the camera, which creates 
the risk of malfunction. To prevent condensation from forming seal the camera in a 
plastic bag before changing locations. Then leave the bag sealed to allow the air 
inside to naturally change to the same temperature as the air in the new location. 
After that, remove the camera from the bag and open the battery cover for a few 
hours.

.

Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can 

scratch the lens surface and cause malfunction.

• You may sometimes notice some distortion in certain types of images, such as a 

slight bend in lines that should be straight. This is due to the characteristics of 
lenses, and does not indicate malfunction of the camera.

Summary of Contents for EX S12 - EXILIM CARD Digital Camera

























































































































































































































Reviews:

No comments

Related manuals for EX S12 - EXILIM CARD Digital Camera

Olympus E620 - Evolt 12.3MP Live MOS Digital SLR... Specification preview
E620 - Evolt 12.3MP Live MOS Digital SLR...
Brand: Olympus Pages: 2
Olympus E620 - Evolt 12.3MP Live MOS Digital SLR... Specifications preview
E620 - Evolt 12.3MP Live MOS Digital SLR...
Brand: Olympus Pages: 6
Ken A Vision V-VGACON Instruction Manual preview
V-VGACON
Brand: Ken A Vision Pages: 2
Olympus Camedia E-20P Basic Manual preview
Camedia E-20P
Brand: Olympus Pages: 116
FujiFilm HTs18x4.2BERM Quick Manual preview
HTs18x4.2BERM
Brand: FujiFilm Pages: 2
Kodak 8461444 - Max Flash Camera One Time Use Setup Manual preview
8461444 - Max Flash Camera One Time Use
Brand: Kodak Pages: 2
Intenso 15.6 inch MEDIACENTER Operating Instructions Manual preview
15.6 inch MEDIACENTER
Brand: Intenso Pages: 73
Foxtech Bi-Focus User Manual preview
Bi-Focus
Brand: Foxtech Pages: 25
TytoCare TytoPro User Manual preview
TytoPro
Brand: TytoCare Pages: 76
FujiFilm FINEPIX BL00840-200 E Owner'S Manual preview
FINEPIX BL00840-200 E
Brand: FujiFilm Pages: 116
Genie WHD8BVAF User Manual preview
WHD8BVAF
Brand: Genie Pages: 10
Vicon IQeye R5 Series Installation And Operating Instructions Manual preview
IQeye R5 Series
Brand: Vicon Pages: 12
Ganz ZC-Y15PH3 Instructions For Use Manual preview
ZC-Y15PH3
Brand: Ganz Pages: 28
NEARITY AW-V415 User Manual preview
AW-V415
Brand: NEARITY Pages: 16
Panasonic Lumix DC-ZS70K Owner'S Manual preview
Lumix DC-ZS70K
Brand: Panasonic Pages: 302
Panasonic Lumix DC-ZS80D Owner'S Manual For Advanced Features preview
Lumix DC-ZS80D
Brand: Panasonic Pages: 304
Panasonic Lumix LX7 Operating Instructions Manual preview
Lumix LX7
Brand: Panasonic Pages: 226
Panasonic Lumix DMCFX700EP Operating Instructions Manual preview
Lumix DMCFX700EP
Brand: Panasonic Pages: 208

Brands by name

Popular brands

Load more brands