background image

63

Other Playback Functions (PLAY)

Other Playback Functions (PLAY)

This section explains menu items that you can use to configure settings and perform 
other playback operations.

Pressing [SET] in the PLAY mode will display the PLAY Panel.

.

Example PLAY Panel Operation

1.

In the PLAY mode, press [SET].

The PLAY Panel will appear along the 
right side of the monitor screen.

2.

Use [

8

] and [

2

] to select the 

PLAY Panel item you want, and 
then press [SET].

3.

The following describes the operations you can perform for each of the 
PLAY Panel items.

Using the PLAY Panel

 Exit

Exits the PLAY Panel.

 Art 

Effect

You can apply artistic effects to recorded snapshots and save the 
result as a new snapshot. The original snapshot is also retained.
For information setting items, see page 36.

 Silent

The Silent mode turns off camera operation sounds so you can 
avoid disturbing others around you when playing back images 
(page 42).

 

Slideshow

Displays a slideshow menu. See “Playing a Slideshow on the 
Camera (Slideshow)” (page 64
) for slideshow menu operations.

 Delete

Deletes images (page 32).

[

8

] [

2

]

PLAY Panel

[SET]

â

Ü

ä

Ü

Summary of Contents for EX-MR1































































































































Reviews: