28
Quick Start Basics
Toggling Between the REC Mode and PLAY Mode
.
To turn off power
On both the camera and the controller, hold down [
p
] (Power) for about two
seconds.
• Turning off the camera will cause the controller to turn off automatically.
• The camera will emit a sound when the camera is turned off. The camera turns off
when the power down process is complete.
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Turn on the camera and controller (page 26).
• If this is the first time you are turning on power, a language selection screen will
appear. If the screen does not appear, check to make sure that the camera is
turned on.
2.
Flick (page 18) the controller screen upwards and downwards or touch
“
”, “
” until you find the language you want, and then touch to
select it.
To enter the
PLAY mode
In the REC mode, touch “
” (PLAY).
• If “
” (PLAY) is not displayed on
the screen, you can touching the
Review image (page 57), or switch
to the PLAY mode by touching
“
” (Show Icons) and then
touching “
” (PLAY).
To enter the
REC mode
In the PLAY mode, touch “
”
(Show Icons). On the screen image
that appears, touch “
” (REC).
Configuring Basic Settings the First Time You Turn On the
Camera
“
”
(Show Icons)
Screen after “
”
(Show Icons) is touched
“
” (PLAY) / “
” (REC)
