10
Quick Start Basics
.
To remove the hinge unit from the camera
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
2.
Remove the hinge unit from the camera.
.
To attach the hinge unit to the camera
1.
Align the camera’s operation lamp with
the A mark on the hinge unit.
2.
Rotate the camera clockwise about
15 degrees until its operation lamp is aligned
with the B mark on the hinge unit.
A
[FREE] lever
A
B
