29
Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 104.
• For information about images recorded using continuous shutter (CS), see page
1.
Press [
p
] (PLAY) to enter
the PLAY mode.
• This will display one of the
snapshots currently stored in
memory.
• Information about the
displayed snapshot also is
included (page 12).
• You also can clear the information to view only the snapshot (page 158).
• You can zoom in on the image by sliding the zoom controller towards
z
(page
109). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2.
Use [
4
] and [
6
] to scroll between images.
• Holding down either button scrolls at high speed.
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
Viewing Snapshots
[
p
] (PLAY)
[
6
]
[
6
]
[
4
]
[
4
]