Casio EX-F1 - EXILIM Pro Digital Camera User Manual Download

Page: 84 / 186

Advanced Settings

Procedure

[

] (REC)

[MENU]

REC Tab

Focus Bracketing

See page 57 for details.

Procedure

[

] (REC)

[MENU]

REC Tab

Digital Zoom

Select “On” when you want to use digital zoom (page 41).

• Digital zoom is disabled while shooting with the following features.

– Some BEST SHOT scenes (Digital Anti Shake, Digital Panning)

Procedure

[

] (REC)

[MENU]

REC Tab

Quick Shutter

When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high-speed focus operation
that is much faster than Auto Focus.

NOTE

• Quick Shutter is disabled when the zoom factor is greater. Recording is performed

using Auto Focus at this time.

Shooting with Focus Bracketing (Focus Bracketing)

Turning Digital Zoom On or Off (Digital Zoom)

Shooting with Quick Shutter (Quick Shutter)

Turns on Quick Shutter

• Some images may be out of focus when Quick Shutter is used.

Off

Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.

• If you fully press the shutter button while Quick Shutter is turned off,

images will continue to be shot without focusing.

• Whenever possible, take a little extra time to half-press the shutter button

in order to ensure proper focus.

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera



























































































































































































Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands

Casio EX-F1 - EXILIM Pro Digital Camera, User Manual

Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands