manualshive.com logo in svg

Casio EX-F1 - EXILIM Pro Digital Camera, User Manual, Page: 66 / 186

Share
Download
Casio EX-F1 - EXILIM Pro Digital Camera User Manual Download Page 66

66

Recording Movies

1.

While a movie is being recorded, press 
the shutter button.

Movie recording continues after the snapshot is 
recorded.

NOTE

• You can shoot up to 20 snapshots per movie. The number of snapshots is also 

limited by the amount of free space available on the memory card.

• Note that the flash cannot be used when shooting a Snapshot in Movie.
• A snapshot cannot be shot during recording of the following types of movies. 

High-speed Movie, while recording with certain movie BEST SHOT scene (For 
YouTube).

• You cannot use Snapshot in Movie to shoot a snapshot when recording with 

“Prerecord (Movie)” while the movie is being recorded to the buffer before you 
press [

0

]. You will be able to shoot snapshots during real-time movie recording, 

which starts when you press [

0

].

Shooting a Snapshot while Shooting a Movie

Number of recordable snapshots

C

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera



























































































































































































Reviews:

No comments