Casio EX-F1 - EXILIM Pro Digital Camera User Manual Download

Page: 143 / 186

143

Other Settings (Set Up)

Procedure

[MENU]

Set Up Tab

REC/PLAY

• With “Power On/Off”, the camera turns off when you press [

] (REC) in the REC

mode or [

] (PLAY) in the PLAY mode.

• Change this setting to anything besides “Disable” before connecting to a TV for

image viewing.

Procedure

[MENU]

Set Up Tab

LCD Priority

You can use this setting to control when the monitor screen turns on.

Configuring [

] and [

] Settings (REC/PLAY)

Power On

Camera turns on whenever [

] (REC) or [

] (PLAY) is

pressed.

Power On/Off

Camera turns on or off whenever [

] (REC) or [

] (PLAY)

is pressed.

Disable

Camera does not turn on or off whenever [

] (REC) or [

]

(PLAY) is pressed.

Controlling Monitor Screen Priority (LCD Priority)

With this setting, the monitor screen turns on during image playback
and menu display.

Off

With this setting, the monitor screen turns on during image playback
and whenever the [EVF/LCD] button is pressed.

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera



























































































































































































Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands

Casio EX-F1 - EXILIM Pro Digital Camera, User Manual

Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands