7
3.2
Construction steps
The followings are the basic steps to construct the development environment.
Due to version upgrade of Android Studio, environment may not be constructed by the
following procedure. In that case, refer to the procedure described on Google's website etc. and
construct the environment.
(1) Android Studio
Download and Install the Android Studio to the PC.
About the version of the Android Studio, refer to the "3.1 Recommended enviorment (p.6)".
Refer to the "3.2.1 Android Studio (p.8)" for the construction method.
(2) Android SDK and USB driver
Download the Android SDK and USB driver from Google via Android Studio.
The Android SDK will be installed automatically after downloading.
The USB driver is installed when the device is connected to the PC for the first time.
About the version of the Android SDK, refer to the "3.1 Recommended enviorment (p.6)".
Refer to the "3.2.2 Android SDK and USB driver (p.12)" for the construction method.
(3) Application development
Develop an application with the installed Android Studio.
To debug an application, connect the PC and the ET-L10 via the ADB (Android Debug Bridge)
interface.
Refer to the "3.2.3 Application development (p.15)" for development.