50
Connecting the Camera to a Computer
(Wi-Fi connection)
.
Wi-Fi connection via STATION
Procedure on the camera
1.
Tap (recall) on the left side of screen.
2.
Tap
(Setting).
3.
Tap “Wi-Fi”.
4.
Set “Wi-Fi” to “ON”.
5.
In “Wi-Fi Mode”, select “STATION”.
6.
Tap “SSID”.
7.
In the STATION MODE screen, select the
SSID you want to connect to.
If the desired SSID is shown
1) Select the SSID for the router you want to
connect to and enter the password for the router.
2) Tap .
If the desired SSID is not shown
If the stealth settings are enabled, SSIDs are not shown. Check the router
settings and then use the procedure below to configure the settings.
1) Tap “+Add Network”.
2) Enter the SSID.
3) Select the router authentication method.
4) Select the router IP address setting.
5) Tap .
The added SSID appears in the STATION MODE screen.
None
If no password is set
WEP
For the WEP method
WPA/WPA2 PSK
For the WPA PSK/WPA2 PSK method
DHCP
To allocate IP addresses automatically
Static
To enter the IP address manually
Input details: Static IP address, gateway address,
network prefix length
SSID
Wi-Fi
ON
OFF
Wi-Fi
Wi-Fi Mode
AP
STATION
abcdefghijk_G
STATION MODE
abcdefghijk_A
+ Add Network
