Multidrop Method
To handle communication between mobile terminal and PC you can use a utility called
Multidrop. This communication method uses the Basic Cradle DT-960IO only.
Basic Cradle (DT-960IO-E)
Attach the power supply (DT-9020ADP-G) to the Cradle (DT-960IO-E), but do not switch on
the cradle yet.
Check the position of the DIP switches on the bottom of the cradle. The following switch
position should be adjusted:
Switch
1 2 3 4 5 6 7 8
Position
ON OFF ON OFF OFF ON OFF OFF
Connect the cradle to your PC by using serial cable (DT-787-G). Switch the cradle on.
If you have any other devices or software listening to the serial port assigned to
Multidrop, disable it. That applies to Microsoft ActiveSync and especially to "CASIO
IRXpress Serial Infrared", the driver software for other Casio communication cradles. To
deactivate "CASIO IRXpress Serial Infrared", go to the device manager on your PC. In the
list of known devices make a double-click on the node for IrDA to expand the view. Then,
perform a right-click with the mouse on the entry for "CASIO IRXpress Serial Infrared", and
disable it.
Installation of Multidrop
Install latest version of Multidrop to your PC. Follow the instructions on the screen. Accept
default settings.
