manualshive.com logo in svg

Casio ClassPad II fx-CP400+E, User Manual

Share
Download
Casio ClassPad II fx-CP400+E User Manual Download Page 107

Chapter 3: Graph & Table Application

  

107

Saving a Screenshot of a Graph

Use the following procedures to save a screenshot of a graph as image data for later recall.

 

u

To open a screenshot of a graph

1. On the Graph window, tap 

a

 and then [Open Picture]. This displays a list of names of graph images you 

have stored in memory.

2. Select the name of the image you want, and then tap [OK].

• The image you select is displayed as the Graph window background.

 

u

To save a screenshot of a graph

1. Draw the graph you want to save.

2. Tap 

a

 and then [Save Picture]. This displays a dialog box for inputting a name for the screenshot.

3. Enter the name and then tap [OK].

 

u

To clear the current screenshot of a graph

On the Graph window, tap 

a

 and then [Clear Picture].

Adjusting the Lightness (Fade I/O) of the Graph Window Background Image

You can adjust the lightness of the graph window background image within a range of 0% (as-is) to 100% (all 
white). A higher setting value makes the image lighter, and a setting of 100% displays an all white background. 
You can use this setting to adjust the background image to a level that makes the graph easier to see.

 

u

To adjust the lightness (Fade I/O) of the graph window background image

1. On the Graph window, tap 

a

 and then [Fade I/O].

• This causes a slider for adjusting image lightness to appear on the toolbar.

2. Use 

d

 and 

e

 to adjust the lightness value.

• Each press of 

d

 and 

e

 changes the setting value in steps of 5%.

3. After the setting is the way you want, tap [OK].

Summary of Contents for ClassPad II fx-CP400+E





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands