manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 529

20070201

10-5-1

eActivity File Memory Usage Screen

  10-5  eActivity File Memory Usage Screen

  The size of an eActivity fi le is limited. You can use the eActivity fi le memory usage screen to 
check the current size and how much more memory is available for the eActivity fi le you are 
working on. You can also display the size of the strip that is currently highlighted or where the 
cursor is currently located. 

  

u

  To display the eActivity memory usage screen 

  1. On the eActivity workspace screen, press 

1

 (FILE)

4

 (CAPA). 

  • This will display a screen like the one shown to 

the right, which shows the current size of the 
eActivity fi le (Total Data Size) and how much main 
memory is available for storage of additional data 
(Free Bytes).

  2. To exit the memory usage screen, press 

J

 .

 

 

  • The maximum allowable size for a single eActivity fi le is approximately 30,000 bytes. The 

actual maximum size depends on capture memory and clipboard use. The actual maximum 
fi le size may be less than 30,000 bytes may be less, depending on how capture memory and 
the clipboard are used. 

  

u

  To display the strip memory usage screen 

  1. Use 

f

  and 

c

  to move the highlighting to the strip whose memory usage you want to 

view. 

  2. Press 

1

 (FILE)

5

 (SIZE).

  • This will display the memory usage screen for the 

currently selected strip. 

 

 

 

 

 

 

  3. To exit the memory usage screen, press 

J

 .

 

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands