manualshive.com logo in svg

Casio CFX-9850GB PLUS, User Manual

Share
Download
Casio CFX-9850GB PLUS User Manual Download Page 256

20070201

 5-11 Function Analysis

  

k

  Reading Coordinates on a Graph Line

  Description

  Trace lets you move a pointer along a graph and read out coordinates on the display.

  Set Up

  1. From the Main Menu, enter the 

 GRAPH

  mode.

  2. Draw the graph.

 

 

  Execution

  3. Press 

!1

 (TRCE), and a pointer appears in the center of the graph.*

 1

 

  4. Use 

d

  and 

e

  to move the pointer along the graph to the point at which you want to 

display the derivative. 

    When there are multiple graphs on the display, press 

f

  and 

c

  to move between 

them along the  

x

 -axis of the current pointer location.

  5. You can also move the pointer by pressing 

v

  to display the pop-up window, and then 

inputting coordinates. 

    The pop-up window appears even when you input coordinates directly. 

  To exit a trace operation, press 

!1

 (TRCE).

 

 

 *

 1

 The pointer is not visible on the graph when 

it is located at a point outside the graph 
display area or when an error of no value 
occurs.

  # You can turn off display of the coordinates at the 

pointer location by specifying “Off” for the “Coord” 
item on the Setup screen. 

5-11-1

Function Analysis

Summary of Contents for CFX-9850GB PLUS

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands