Casio CELVIANO GP-510, User Manual

Page: 20 / 84

EN-18
Playing with Different Tones
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings.
1.
Press the SETTING bu tton to display the
setting screen.
2.
Use the
q
and
w
arrow bu ttons to select
“D u et” and then press the ENTER bu tton.
3.
Use the
q
and
w
arrow bu ttons to select a
key b oard range.
• Upper Octave: Right-side keyboard
Lower Octave: Left-side keyboard
4.
Use the
u
(–) and
i
(+) arrow bu ttons to
change the octave.
• +1 or higher: Raises the octave by the specified value.
–1 or lower: Lowers the octave by the specified value.
0: Returns the octave to its original setting.
• The setting range is –2 to +2.
• Example: To select “Lower Octave” in step 3 and set
“+1” in step 4
5.
Press the SETTING bu tton to exit the setting
screen.
Use the following procedure to layer two tones, so they
sound at the same time.
1.
Press the LAYER bu tton.
2.
Use the
u
and
i
arrow bu ttons to display
“LAYER”.
3.
Select the main tone.
• Use the
q
and
w
arrow buttons to select “U1”
(Upper 1) and then press the ENTER button.
4.
Select a tone and then press the ENTER
bu tton.
• See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
5.
Select the layered tone.
• Use the
q
and
w
arrow buttons to select “U2”
(Upper 2) and then press the ENTER button.
6.
Select a tone and then press the ENTER
bu tton.
7.
Press a key b oard key.
• Both tones sound at the same time.
To chan g e the octaves of the duet
keyboards

L o w e r O c t a v e
C4 C5 C6 C7 C3 C4 C5 C6
Left key b oard Right key b oard
1 octave higher than initial
setting
Unchanged
Layerin g Two Tones

U 1

U 2