Casio Celviano AP-265, User Manual

Page: 22 / 42

Configuring Settings with the Keyboard
EN-21
■
Tones
Parameter List
Parameter Settings
Operation
Type
(page
EN-19)
Description Remarks
 Reverb Off, 1 to 4
Default: 2 A Specifies the reverb of notes.
(page EN-7)
 Tone selection See page EN-5.
Default: GRAND
PIANO 1
(CONCERT) A Assigns a tone to the keyboard.
(page EN-5)
 Chorus Off, 1 to 4
Default: Off D Controls the breadth of notes.
(page EN-7)
 Brilliance –3 to 0 to 3
Default: 0 B Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer. • To return the setting to its initial default (0),
press [+] and [–] at the same time.
 Layer balance –24 to 0 to 24
Default: –10 B Specifies the volume balance
between the main tone and the
layered tone. (page EN-6) • To return the setting to its initial default
(–10), press [+] and [–] at the same time.
 Lower Pedal Off, On
Default: Off D When turned on and the
BASS (LOWER) tone is selected,
pressing the damper pedal or
sostenuto pedal will apply
sustained reverberation to the
BASS (LOWER) tone. (page EN-6)
 Damper noise Off, On
Default: On D Enables/disables damper noise
output. (page EN-8)
 Select layer tone Off, On
Default: Off D Enables or disables layering.
(page EN-6) • BASS (LOWER) cannot be layered with
another tone.
• Configuring of layering settings is not
supported for recording function Track 2
recording.
 Duet mode Off, On, Pan
Default: Off D Enables or disables the Duet Mode.
(page EN-10) • When Pan is specified, Reverb and Chorus
effects cannot be applied.