Controlling the Sound of a Performance
EN-50
1.
Press
TONE
.
This displays the tone screen.
2.
Press SPLIT.
This displays “L” to the left of the tone number and “SP” below it. “L” indicates the LOWER part.
3.
Rotate the dial to select the tone to be assigned to the low range keyboard.
•
For tone information, see the “
•
After you rotate the dial once to select a tone, you can change the selection further using – and
+.
•
To return to the first tone in the Tone List, press – and + at the same time.
•
If you want to select a category, use CAT–/CAT+.
•
To go back to the previous screen, press BACK.
4.
Play something on the low range of the keyboard.
This sounds the selected tone.
•
To turn off split, press SPLIT again.
Splitting the Keyboard Between Two Different Tones
LOWER
UPPER1
F3
Split point
