Connecting with External Devices
EN-170
You can use a Wireless MIDI & audio adaptor (optional: WU-BT10) to pair this Digital Keyboard with an
external Bluetooth audio capable audio device and then playback from the external device through this
Digital Keyboard’s speakers.
•
Before performing the pairing operation, turn down the volume levels of this Digital Keyboard
and the external device.
•
If external device notes sounded by this Digital Keyboard are distorted, lower the external
device’s volume level.
•
If the volume level of the external device notes sounds by this Digital Keyboard is lower than
the volume level of the notes you are playing on the keyboard, adjust the volume balance of
the Digital Keyboard. See “
Changing the Volume Balance Between Keyboard Play and
” on page
•
Setting the volume level of the external device too high can cause Digital Keyboard power to
turn off in order to protect it against damage. If this happens, lower the volume of the external
device.
•
Due to Bluetooth characteristics you may notice some lag in notes. If that happens, connect
using a USB cable.
1.
Long-press the
P
(Power) button to turn off the Digital Keyboard.
2.
Plug the Wireless MIDI & audio adaptor into the
USB TO DEVICE
port (page
).
3.
Press the
P
(Power) button to turn on the Digital Keyboard.
This displays the Bluetooth icon.
4.
Press
MENU
.
This displays the menu screen.
5.
Use
U
and
I
to select the 5 buttons menu that includes BLUETOOTH.
Sounding a Bluetooth Audio Capable Device (Bluetooth
Audio Pairing)
Bluetooth icon
