background image

23

The password feature lets you keep unauthorized individuals from using the projector. You can specify 
whether password input is required whenever you turn on the projector, and you can specify and 
change the password as required. Use the Setup Menu “Option Settings 1 

3

 Password” setting to 

configure password settings.

Using the Password Feature

Note the following precautions whenever you use the password feature.

The password feature protects against unauthorized use of the projector. Note that it is not an 
anti-theft measure.

You will need to enter the initial factory default password the first time you use the projector after 
turning on the password feature. Change the initial factory default password to a different one of 
your choice as soon as possible after turning on the password feature.

Remember that password operations are always performed using the remote controller, so you 
should take care not to lose or misplace the remote controller.

Also note that you will not be able to input the password if the remote controller batteries are dead. 
Replace the remote control batteries as soon as possible after it starts to go low.

If you forget your password...

If you forget the password, you will need to bring the following two items to your CASIO distributor to 
have the password cleared. Note that you will be charged to have the password cleared.

Note that your CASIO distributor will not be able to clear the password of your projector unless you 
bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.

Important!

Having your password cleared using the procedure described above will return all of the 
settings of your projector, except for the Light Time, to their initial factory defaults.

Keep a written record of your password!

You will not be able to use the projector if you forget its password. We strongly suggest that you keep 
a written or other type of record of the password so you can look it up when necessary.

Password Protection

1. Personal identification (original or copy of your driver’s license, employee I.D., etc.)
2. Projector unit

Summary of Contents for Casio XJ-V2-UJ3000












































Reviews: