Casio 5699, Operation Manual, Page: 8 / 14

World Time
World Time lets you look up the current time
in any one of 30 cities (29 time zones) around
the globe.
Important!
●
The current times in the Timekeeping
mode and World Time mode are not
synced. You need to adjust each
mode’s current time setting
individually.
●
The seconds of the World Time Mode
and Timekeeping Mode seconds are
synced.
●
Adjusting the current time setting for
the displayed World Time City causes
all other World Time cities to be
adjusted accordingly.
Checking World Time
1.
Enter the World Time Mode.
l
Navigating Between Modes
The World Time City that appears first is
the one that was displayed the last time
you exited the World Time Mode.
World Time City
World Time
2.
Press (D).
●
Each press of (D) changes the World
Time city.
●
Holding down (D) scrolls through
settings at high speed.
Configuring the World Time
Setting
Adjusting the current time setting for the
displayed World Time City causes all other
World Time cities to be adjusted accordingly.
If you are in an area that observes summer
time, you can also configure a summer time
setting.
1.
Enter the World Time Mode.
l
Navigating Between Modes
2.
Use (D) to display the city whose current
time setting you want to adjust.
●
Holding down (D) scrolls through
settings at high speed.
3.
Hold down (A) for at least one second.
Release the button when [DST]
[ON] or
[DST] [OFF] starts to flash.
●
Each press of (D) toggles between
standard time and summer time.
ー
[OFF]
The watch always indicates standard
time.
ー
[ON]
The watch always indicates summer
time.
4.
Press (C).
This causes the hours digits to flash.
5.
Use (B) and (D) to change the hour setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
6.
Press (C).
This causes the minutes digits to flash.
7.
Use (B) and (D) to set the minute setting.
8.
Press (A) to exit the setting screen.
●
[DST] appears whenever the display
current time is summer time.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
The summer time setting you configure
is applied to the currently selected city
only. It does not affect other cities.
Watch Operation Guide 5699
8