Casio 5659, Operation Manual, Page: 17 / 28

World Time
World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Coordinated Universal Time).
Using BABY-G Connected to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use BABY-G Connected to set the World
Time city.
l
Configuring World Time Settings
Note
●
World Time cities that can be selected
only by using BABY-G Connected
cannot be selected using watch
operations.
Checking World Time
1.
Enter the World Time Mode.
l
Navigating Between Modes
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
●
You can return to the World Time City
display by pressing (A) or (D).
World Time
World Time City
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the World Time Mode.
l
Navigating Between Modes
2.
Use (D) to display the city you want.
3.
To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when the current
summer time setting starts to flash.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
4.
Use (D) to change the summer time
setting.
Each press of (D) cycles through settings
in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
5.
Press (A) to exit the setting screen.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
If you select a World Time City with
BABY-G Connected and then change
to a different city with a watch
operation, the BABY-G Connected city
information is deleted from the watch.
l
Configuring World Time Settings
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
After swapping Before swapping
World Time
World Time Home Time
Home Time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Watch Operation Guide 5659
17