Timer Countdown Indication
30 minutes before the end of a timer operation
is reached, a countdown start tone sounds
and the function hand starts to indicate the
remaining time until the end of the timer
operation.
●
The countdown start tone will not sound
when the timer start time is 30 minutes or
less.
Function hand
Note
●
You can use the procedure below to
enable or disable the countdown start
tone.
l
Disabling the Countdown Start
Tone
●
During a period within 30 minutes of
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Using EDIFICE Connected to
Adjust Hand Alignment
If the watch is paired with a phone, you can
also use EDIFICE Connected to adjust hand
alignment.
l
Adjusting Hand Alignment
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This starts the function hand indicator
alignment operation.
After five seconds
After 3.5 seconds
Function hand
3.
If the function hand is not aligned with 12
o’clock, use (B) and (D) to align it.
4.
Press (C).
This enables adjustment of the hour and
minute hands.
Minute hand
Hour hand
5.
If the hour and minute hands are not at 12
o’clock, use (B) and (D) to align them.
6.
Press (A) to exit the setting screen.
Other Settings
This section explains other watch settings you
can configure.
Changing the Date Display
Format
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
Press (C) nine times.
This displays a screen for selecting the
date display format.
4.
Press (D) to select a date display format.
[M.DD]: Month, day
[DD.M]: Day, month
5.
Press (A) to exit the setting screen.
Watch Operation Guide 5658
23
