Casio 5553, Operation Manual, Page: 12 / 17

●
Testing the alarm
In the Alarm Mode, hold down (D) to sound the
alarm.
●
To stop the alarm
Pressing any button while the beeper is
sounding stops it.
●
The snooze alarm operation sounds the
alarm up to seven times at five-minute
intervals. [SNZ] flashes on the display to
indicate that a snooze alarm operation is in
progress.
●
Any one of the operations below will stop an
ongoing snooze alarm operation.
ー
Turning off the snooze alarm
ー
Displaying the snooze alarm setting
screen
ー
Displaying the Timekeeping Mode
setting screen
ー
Changing the DST setting of your Home
Time in the World Time Mode
ー
Changing your Home City in the World
Time Mode
Note
●
A beeper sounds for 10 seconds when
an alarm time is reached.
●
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Enabling the Hourly Time
Signal
1.
Enter the Alarm Mode.
l
Navigating Between Modes
2.
Press (D) to display the hourly time signal
screen ([SIG]).
3.
Press (A) to toggle the hourly time signal
between enabled (on) and disabled (off).
●
[SIG] is displayed while the hourly time
signal is enabled.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
●
To have an alarm or hourly time signal
sound again, turn it back on.
Note
●
Indicators are displayed while any of
the alarms or the hourly time signal is
turned on.
●
The applicable indicators are not
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Snooze
Hourly time signal
1.
Enter the Alarm Mode.
l
Navigating Between Modes
2.
Use (D) to scroll through the alarm ([AL1]
to [AL4], [SNZ]) and hourly time signal
([SIG]) screens until the one you want to
turn off is displayed.
Alarm or hourly time signal
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (A) toggles between ON
and OFF.
●
Turning off all of the alarms and the
hourly time signal causes [ALM] and
[SIG] to disappear from the display.
Note
●
If [ALM] remains on the display, it
means that at least one alarm is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the [ALM]
indicator is no longer displayed.
Watch Operation Guide 5553
12