Swapping Your Home Time
and World Time
1.
Enter the World Time Mode.
l
2.
Press (A) and (B) at the same time.
This will swap your Home City Time and
World Time.
Example: To swap your Home City
(TYO:TOKYO) and World Time City
(NYC:NEW YORK)
After swapping
Before swapping
TYO time
NYC time
TYO time
NYC time
Alarm
The watch will beep when the alarm time is
reached. You can configure up to four
standard daily alarms, and one daily alarm
with snooze. The hourly time signal causes the
watch to beep every hour on the hour.
●
Snooze causes the alarm to sound up to
seven times, at five-minute intervals.
Configuring Alarm Settings
1.
Enter the Alarm Mode.
l
2.
Press (D) to scroll through alarms ([AL1]
to [AL4], [SNZ]) until the one you want to
configure is displayed.
Alarm time
Alarm number
3.
Hold down (A) for at least two seconds.
Release the button when the hour setting
starts to flash.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Alarm hour
4.
Use (B) and (D) to change the hour setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
●
If you are using 12-hour timekeeping,
[P] indicates p.m.
5.
Press (C).
This causes the minutes digits to flash.
Alarm minute
6.
Use (B) and (D) to set the minute setting.
7.
Press (A) to complete the setting
operation.
●
[ALM] is shown on the display while an
alarm is set.
Watch Operation Guide 5553
11