Casio 5519, Operation Manual

Page: 11 / 17

Watch Settings
Use the procedure below to configure current
location time and Dual Time settings
manually.
Getting ready
Perform this procedure in the Calendar Mode.
Use (A) to navigate to the Calendar Mode.
l
Navigating Between Modes
Calendar Mode
Setting the Time and Date
While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o’clock and enables the hour and
minute setting operation.
Minutes Hours
Crown
2.
Rotate the crown to adjust the hour and
minute settings.
●
The Dual Time setting is also adjusted
in accordance with the current time
setting. Crown operation is disabled
while the Dual Time setting is being
adjusted.
3.
Press (A).
This enables the month and day setting
operation.
4.
Press (B) to change the month.
8
9
10
3
4
2
5 7
11
1
6
12
Day Month
5.
Rotate the crown to change the day.
6.
Press (A).
This enables the year 10’s digit setting
operation.
7.
Rotate the crown to change the year 10’s
digit.
80
90 30
40
20
50
70
10
60
00
Year (10’s digit)
8.
Press (A).
This enables the year one’s digit setting
operation.
9.
Rotate the crown to change the year one’s
digit.
8
9 3
4
2
5 7
1
6
0
Year (one’s digit)
10.
On a time signal at the top of a minute,
push the crown back in.
Note
●
The day of the week is set
automatically in accordance with the
year, month, and day settings.
Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
Dual Time 24-hour
Dual Time
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2.
Rotate the crown to change the Dual Time
setting.
●
You can set the Dual Time in 15-minute
increments.
＋
−
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
Crown
3.
Push the crown back in.
Swapping Your Current
Location Time and Dual Time
Settings
You can swap the time in your current location
with the Dual Time by holding down (B) for
about three seconds.
After swapping Before swapping
Dual Time
Dual Time
Current location time
Current location time
Note
●
If you are using the small hour and
minute hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Operation Guide 5519
11