1
Operation Guide 5267
MA1110-EA
Your watch may differ somewhat from the one shown in the illustration.
•
Minute hand
Hour hand
Second hand
Day
Crown
(Normal position)
First click
(Setting Day)
Second click
(Setting Time)
To set the time
Pull the crown out to the
1.
second click when the second
hand is at 12 o’clock position
and the second hand stops.
Set the hands by rotating the
2.
crown. Rotate the crown to
move the hands clockwise.
Move the minute hand four or
five minutes past the time you
want to set, and then back it
up to the proper setting.
Carefully set the time,
•
making sure to distinguish
between AM and PM.
Push the crown back in to the
3.
normal position.
To set the day
Pull the crown out to the first click.
1.
Set the day by rotating the crown.
2.
Push the crown back in to the normal position.
3.
Avoid changing the date setting while the current time is between 9:00 p.m. and
•
3:00 a.m.
Using the Stopwatch
Stopwatch minute hand
Stopwatch 1/5-second hand
Stopwatch hour hand
The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes, 59.80
seconds.
To measure elapsed times with the stopwatch
3TART
3TOP
2ESTART
3TOP
#LEAR
For a watch with an elapsed time bezel
■
Rotate the elapsed time bezel to align the
mark with the
minute hand.
After certain amount of time elapsed, read the graduation on
the elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
Elapsed time beze
l
Some water resistant models are equipped with a screw
•
lock crown.
With such models, you must unscrew the crown in the
•
direction noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
Also note that such watches are not water resistant while
•
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.
Specifications
Accuracy at normal temperature:
±
20 seconds a month
Display:
3 analog hands (timekeeping hour and minutes, stopwatch 1/5-second),
3 dials (timekeeping seconds, stopwatch hours and minutes), Day indicator
Stopwatch function:
Measuring capacity: 11:59'59.80"
Measuring unit: 1/5-second
Measuring mode: Elapsed time
Battery:
One silver oxide battery (Type: SR936SW)
Approximately 3 years on type SR936SW (assuming one stopwatch operation 60 min./
day)