Measuring a Split Time
1.
Enter the Stopwatch Mode.
l
2.
Use the operations below to measure
elapsed time.
A
C
C
A
Stop
Split release
Split
Start
Hours
Minutes, seconds, 1/10 seconds
3.
Press (C) to reset the stopwatch to all
zeros.
Timing the First and Second
Place Finishers
1.
Enter the Stopwatch Mode.
l
2.
Use the operations below to measure
elapsed time.
A
C
A
2nd Finisher*
1st Finisher*
Start
* Displays the time of the first finisher.
Hours
Minutes, seconds, 1/10 seconds
3.
Press (C) to display the time of the second
place finisher.
4.
Press (C) to reset the stopwatch to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper will not sound if battery power
is low.
Setting a Start Time
The countdown start time can be set in 1-
minute units up to 24 hours.
1.
Enter the Timer Mode.
l
2.
Hold down (E) for at least two seconds.
Release the button when the hour setting
starts to flash.
Hours
3.
Use (A) and (C) to change the timer hours
setting.
●
Holding down (A) or (C) scrolls through
settings at high speed.
4.
Press (D).
This causes the minutes digits to flash.
Minutes
Watch Operation Guide 3513
29
