manualshive.com logo in svg

Casio 3495, Operation Manual, Page: 17 / 19

Share
Download
Casio 3495 Operation Manual Download Page 17

Specifying the Day of the

Week Language

You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.

1.

Enter the Timekeeping Mode.

l

Navigating Between Modes

2.

Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.

Home City

3.

Press (C) 10 times.

This causes the language setting to flash.

4.

Use (D) to select a language.

[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian

5.

Press (A) to exit the setting screen.

Note

●

While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

Enabling the Button

Operation Tone

Use the procedure below to enable or disable
the tone that sounds when you press a button.

1.

Enter the Timekeeping Mode.

l

Navigating Between Modes

2.

Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.

Home City

3.

Press (C) 11 times.

This causes [KEY♪] or [MUTE] to flash on
the display.

4.

Use (D) to select [KEY♪] or [MUTE].

[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.

5.

Press (A) to exit the setting screen.

Note

●

While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

●

Note that alarm and timer tones will still
sound even while the operation tone is
muted.

Configuring Power Saving

Function Settings

1.

Enter the Timekeeping Mode.

l

Navigating Between Modes

2.

Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.

Home City

3.

Press (C) 14 times.

This displays [POWER SAVING].

4.

Press (D) to toggle between ON and OFF.

[On]: Power Saving enabled.
[OFF]: Power Saving disabled.

5.

Press (A) to exit the setting screen.

Note

●

While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

●

For details about Power Saving, refer
to the information below.

l

Power Saving Function

Watch Operation Guide 3495

17

Summary of Contents for 3495




















Reviews:

No comments