background image

Resetting Watch Settings

This section explains how to return the watch
settings below to their initial factory defaults.

Watch Settings

Stopwatch

Timer

Alarm

Profile

1.

Enter the Timekeeping Mode.

l

Navigating Between Modes

2.

Hold down (A) for at least two seconds.

This displays the Timekeeping Mode
setting screen.

Pointer

3.

Use (A) and (D) to move the pointer to
[RESET ALL SETTINGS].

4.

Press (C).

5.

Use (A) and (D) to move the pointer to
[EXECUTE].

To cancel the reset operation, move the
pointer to [CANCEL].

6.

Press (C).

7.

Use (A) and (D) to move the pointer to
[YES].

To stop the reset operation, move the
pointer to [NO].

8.

Press (C).

After the reset operation is complete,
[COMPLETED] will appear for a few
seconds, and then the Timekeeping
Mode setting screen will re-appear.

9.

Press (E) to exit the setting screen.

Note

Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.

Other Information

This section provides non-operational
information you also need to know. Refer to
this information as required.

City Table

City

Offset

UTC

Coordinated
Universal Time

0

LONDON

London

0

PARIS

Paris

+1

ATHENS

Athens

+2

JEDDAH

Jeddah

+3

TEHRAN

Tehran

+3.5

DUBAI

Dubai

+4

KABUL

Kabul

+4.5

KARACHI

Karachi

+5

DELHI

Delhi

+5.5

KATHMANDU

Kathmandu

+5.75

DHAKA

Dhaka

+6

YANGON

Yangon

+6.5

BANGKOK

Bangkok

+7

HONG KONG

Hong Kong

+8

EUCLA

Eucla

+8.75

TOKYO

Tokyo

+9

ADELAIDE

Adelaide

+9.5

SYDNEY

Sydney

+10

LORD HOWE
ISLAND

Lord Howe
Island

+10.5

NOUMEA

Noumea

+11

WELLINGTON

Wellington

+12

CHATHAM
ISLAND

Chatham
Islands

+12.75

NUKU’ALOFA

Nuku’alofa

+13

KIRITIMATI

Kiritimati

+14

BAKER ISLAND Baker Island

-12

PAGO PAGO

Pago Pago

-11

HONOLULU

Honolulu

-10

MARQUESAS
ISLANDS

Marquesas
Islands

-9.5

ANCHORAGE

Anchorage

-9

LOS ANGELES Los Angeles

-8

DENVER

Denver

-7

CHICAGO

Chicago

-6

NEW YORK

New York

-5

HALIFAX

Halifax

-4

ST. JOHN’S

St. John’s

-3.5

RIO DE JANEIRO Rio de Janeiro -3

F. DE NORONHA

Fernando de
Noronha

-2

PRAIA

Praia

-1

The information in the above table is current
as of January 2020.

Time zones may change and UTC
differentials may become different from
those shown in the table above. If this
happens, connect the watch with a phone
to update the watch with the latest time zone
information.

Summer Time Table

When [AUTO] is selected for a city that
observes summer time, switching between
standard time and summer time will be
performed automatically at the timing shown
in the table below.

Note

Summer time start and end dates for
your current location may be different
from those shown below. If this
happens, you can have new summer
time information for your Home City
and World Time city sent to the watch
by connecting the watch with a phone.
If the watch is not connected with a
phone, you can change the summer
time setting manually.

Operation Guide 3481

27

Summary of Contents for 3481
































Reviews: