8.
Use (A) and (D) to move the pointer to
[EXECUTE].
●
To cancel data deletion, move the
pointer to [CANCEL].
9.
Press (C).
This displays a confirmation screen.
10.
Use (A) and (D) to move the pointer to
[YES] or [NO].
11.
Press (C).
After the data delete operation is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Notification Mode screen will re-appear.
Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
●
The sound and/or vibration alert operations
will not be performed while battery power is
low.
Setting the Timer Start Time
The start time can be set in 1-second units up
to 60 minutes.
1.
Enter the Timer Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3.
Use (A) and (D) to specify the number of
timer repeats (Auto Repeat).
4.
Press (C).
5.
Use (A) and (D) to specify the position of
the timer in the sequence.
Timer sequence
6.
Press (C).
This moves the cursor to the minutes
setting.
7.
Use (A) and (D) to change the minutes
setting.
Minutes
8.
Press (C).
This moves the cursor to the seconds
setting.
9.
Use (A) and (D) to change the seconds
setting.
Seconds
10.
Press (C).
11.
Use (A) and (D) to select whether or not
you want to save your current settings.
[YES]
Saves current settings.
[NO]
Discards current settings.
[RETURN]
Returns to the number of
repeats setting.
12.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Note
●
To exit the timer setting operation at
any point, press (E) and advance to
step 11.
Using the Timer
1.
Enter the Timer Mode.
l
2.
Use the operations below to perform a
timer operation.
C
C
C
(Time up)
Resume
Pause
(Countdown starts)
Start
●
The watch performs a sound and/or
vibration operation for 10 seconds
when the end of the countdown is
reached.
●
You can reset a paused countdown to
its start time, by pressing (E).
3.
Press any button to stop the sound and/or
vibration operation.
Operation Guide 3481
19
