Casio 3475 Operation Manual Download Page 45

Page: 45 / 58

Measuring a Split Time

Enter the Stopwatch Mode.

Navigating Between Modes

Use the operations below to measure
elapsed time.

Stop

Split release

Split

Start

Hour, minute, second

Press (E) to reset the stopwatch to all
zeros.

World Time

World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Universal Coordinated Time).

Note

●

World Time cities that can be selected
only by using G-SHOCK MOVE cannot
be selected using watch operations.

Configuring World Time Settings

Checking World Time

Enter the Timekeeping Mode.

Navigating Between Modes

Use (A) to display the World Time.

Selecting a Timekeeping Mode Digital
Display Format

This displays to the current World Time
City and the current time there.

World Time City

World Time

World Time City Setting

Use the procedure in this section to select a
World Time city.

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds.

This displays the Timekeeping Mode
setting screen.

Pointer

Use (A) and (D) to move the pointer to
[WORLD TIME].

Press (C).

This displays the World Time setting
screen.

Use (A) and (D) to move the pointer to
[CITY].

Press (C).

This displays a menu of World Time
Cities.

Use (A) and (D) to move the pointer to the
city you want to use.

Press (C) to complete the setting
operation.

After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the World Time
setting screen will re-appear.

Press (E) twice to exit the setting screen.

This will display the current time and date
in the selected city.

Note

●

If you currently have a World Time City
that is selectable with G-SHOCK
MOVE only and then use watch
operation to change to a different city,
the G-SHOCK MOVE city information
will be deleted from the watch.

Configuring World Time Settings

Configuring the Summer

Time Setting

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds.

This displays the Timekeeping Mode
setting screen.

Pointer

Use (A) and (D) to move the pointer to
[WORLD TIME].

Press (C).

This displays the World Time setting
screen.

Pointer

Operation Guide 3475

Summary of Contents for 3475



























































Search results

Summary of Contents for 3475

Reviews:

Casio 3475, Operation Manual, Page: 45 / 58

Search results

Summary of Contents for 3475

Reviews: