2332-1
Module No. 2332
TIMEKEEPING MODE
In addition to normal timekeeping, use the Timekeeping Mode to set the current time
and date.
•
In the Timekeeping Mode, press
B
to toggle between the time and date screens.
Read This Before You Set the Time and Date !
The digital times displayed in the Timekeeping Mode and World Time Mode are
linked. Because of this, make sure you select a “Home City” (the city whose time and
date you are setting), before you set the time and date.
•
This watch features separate digital and analog timekeeping. Note that the digital
time and analog time are independent of each other, and must be set separately.
To set the digital time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds digits start to flash.
2. While the seconds digits are flashing, press
on
the keypad to reset the seconds to
AA
.
•
Pressing
while the seconds count is in the range
of 30 to 59 resets the seconds to
AA
and adds 1 to the
minutes. In the range of 00 to 29, the minutes count is
unchanged.
3. Press
B
or
C
to move the flashing in the sequence below to select other settings.
•
See “Daylight Saving Time (DST)” for details on DST On/Off setting.
•
You must input separate values for each of the two digits of the hour, minutes, year,
month, and day settings. With the year setting, you can input values for the two
rightmost digits.
•
While any selection is flashing, press
L
to toggle between 12-hour format (
A
or
P
indicator appears) and 24-hour format (no indicator).
4. Use
B
and
C
to select the city code setting.
5. Use
and
to scroll through the city codes until the one you want to set
as your Home City.
•
Pressing
scrolls forward, while
scrolls back through city codes.
•
See “CITY CODE TABLE” for a complete list of available codes.
A
B
C
L
Keypad
Crown
•
Press
C
to change from mode to mode.
•
In any mode (except for the Stopwatch Mode), press
L
to illuminate the display.
World Time Mode
Currency Conversion Mode
Timekeeping Mode
Telememo Mode
Calculator Mode
▲
▲
▲
▲
A
B
C
L
▲
Alarm Mode
▲
Stopwatch Mode
▲
6. Use
B
and
C
to select the hour, minutes, year, month, and day, and make the
settings you want for each.
•
While hour, minutes, year, month, or day is selected (flashing), use the keypad keys
to input the number you want.
•
The flashing selection automatically advances to the right each time you input a
number.
•
You should input both digits for the hour, minutes, year, month, and day settings. If
you want to specify 3 o’clock, for example, input 03 for the hour.
•
While hour or minutes is flashing, press
to toggle between AM (
A
indicator
appears) and PM (
P
indicator appears).
7. After you make the setting you want, press
A
to return to the current time screen.
•
The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
•
The year can be set in the range of 1995 to 2094.
•
The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after the replacement of the watch’s battery.
To set the analog time
1. Pull the crown out.
2. Set the hands by turning the crown.
3. Push the crown back in to restart timekeeping.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle your Home City time between DST and Standard Time
1. In the Timekeeping Mode, hold down
A
until the
seconds digits start to flash.
2. Press
B
to move the flashing to the DST On/Off setting.
3. Press
or
to toggle Daylight Saving Time
(
ON
) and standard time (
OFF
).
4. Press
A
to return to the current time screen.
•
The
DST
indicator appears on the display to indicate
that daylight saving time is turned on.
CALCULATOR MODE
The Calculator Mode lets you perform addition,
subtraction, multiplication, and division and other
operations using 8-digit values (7 digits for negative
values, because one digit is used by the minus sign).
•
You can use the Calculator Mode to turn the input tone
on and off.
Using the Calculator
•
Input calculation just as you do with any standard
calculator, as shown in the examples below. Be sure to
press
B
to clear the calculator before beginning each
calculation.
•
If the result of a calculation exceeds 8 digits, an
y
(error)
indicator appears on the display. Press
B
to clear the
error indicator.
[Time]
A
B
C
L
PM indicator
Hour : Minutes
Seconds
Crown
[Date]
Day of week
Month – Day
▲
▲
Press
B
.
A
B
C
L
Keypad
Seconds
Press
B
.
Press
C
.
Day
DST
On/Off
Month
City Code
Year
Hour
Minutes
A
B
C
L
A
B
C
L
•
Button operations are indicated using the letters shown
in the illustration.
ABOUT THIS MANUAL
•
Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “REFERENCE” section.
GENERAL GUIDE
•
If the digital display of your watch is continuously changing, see “Auto
Display Function” for information on how to stop it.