CSN-A1 user manual
25
1b 3f 20
30 20 30 20 0d 0a
Cancel user customized characters
Name
Cancel user customized characters
Code
ASCII
:
ESC ? n
DEC
:
27 63 n
HEX
:
1B 3F n
Function
Cancel user customized characters of specified code by n
Range
32 ≤ n ≤ 126
Default
None
Notes
This command terminates the use of styles defined for character
encoding, which is specified by n. After the user customized character is
canceled, it is printed in the corresponding mode of the internal character.
In the font selected with ESC !, the command removes the style defined
for the specified encoding.
If a user customized character is not defined, the printer ignores the
command.
Example
None
Set / remove quadruple angle of Chinese print
Name
Set / remove quadruple angle of Chinese print
Code
ASCII
:
FS W n
DEC
:
28 87 n
HEX
:
1C 57 n
Function
Set or remove quadruple angle of Chinese print
When LSB of n is 0,Remove quadruple angle of character mode
When LSB of n is 1,Set quadruple angle of character mode
Range
0 ≤ n≤ 255
Default
n=0
Notes
Only the lowest bit of n is valid;
In quadruple angle mode,printing character size is the same as set double
width and double height mode to print character size at the same time
When the quadruple angle mode is canceled with this command,the
characters are printed according to the size of the pass-through character;
When the height of some characters in a line is different, all the characters
in the line are aligned on the basis of the baseline;
When the character is enlarged in the horizontal direction, the character is
enlarged to the right with the left side of the character as the reference.
Example
None