Cashino CSN-80V, User Manual

Page: 30 / 74

CSN-80V User manual
30
Set the Angle of Chinese character word space
Name Set the Angle of Chinese character word space
Code
ASCII
：
FS S n1 n2
DEC
：
28 83 n1 n2
HEX
：
1C 53 n1 n2
Function
Set the left and right Chinese character space to n1 and n2 respectively.
The left character space is [n1*0.125 mm], and the right character space
is [n2*0.125 mm]
Range
0 ≤ n1 ≤ 255
0 ≤ n2≤ 255
Default n1=0,n2=0
Notes
This command sets the left and right character space of the variable size
characters. When set to double width mode, the left and right character
space is twice ofthe normal mode.
You can set the space separately in standard mode.
In standard mode, use horizontal motion units
Example None
Set up the Chinese characters to print mode combination
Name Set up the Chinese characters to print mode combination
Code
ASCII
：
FS
！
n
DEC
：
28 33 n
HEX
：
1C 21 n
Function
Set up Chinese characters print mode, the setting of n as follows
：
Bit OFF/ON HEX DEC ASB status
0 -- -- -- None
1 -- -- -- None
2 OFF 00 0 Double-width mode is forbidden
ON 04 4
Allow
Double-height mode
3 OFF 00 0 Double-heightmode is forbidden
ON 08 8 Allow
Double-height mode
4 -- -- -- None
5 -- -- -- None
6 -- -- -- None
7 OFF 00 0 Underline mode is forbidden
ON 80 128 Allow the underline mode
Range 0 ≤ n ≤ 255
Default n=0
Notes
Setting both double width mode and double height mode ,(including the
right and left character space),it will print out character in four times of the
size.