6 - MAINTENANCE
Engine oil and filters
Replace the engine oil every
500 h
Replace the engine oil filters every
500 h
Lubricant:
CASE AKCELA UNITEK NO. 1™ SBL CJ-4
Quantity:
41 L
(
10.8 US gal
)
NOTE:
Replace the oil while the engine is warm. Doing so helps the oil in flowing.
1. Park the machine on a flat and level place. Stop the
engine and remove the starter key.
2. Raise and lock the engine hood, and remove the filling
plug.
SMIL19CEX1975AA
1
3. Open the lower panel
(1)
under the engine oil pan.
SMIL19CEX1999AA
2
4. Remove the protection cap from the drain valve on the
engine oil pan.
5. Take out the extension drain hose provided with the
machine from the front storage box. Screw one end
of the extension drain hose onto the drain valve on the
engine, and put the other end into a container with an
appropriate capacity to drain the oil.
6. Remove the extension drain hose, and attach the pro-
tection cap to the drain valve on the engine housing.
Close the lower panel
(1)
. Stow the extension drain
hose in the front storage box.
SMIL14CEX4314AA
3
6-40
Summary of Contents for CX490D
