Case CX490D, Operator'S Manual

Page: 211 / 370

6 - MAINTENANCE
Every 10 hours
Engine oil level
Check the engine oil level every 10 h or every day
Lubricant: CASE AKCELA UNITEK NO. 1™ SBL CJ-4
1. Park the machine on a flat and level place. Stop the
engine, and remove the starter key.
2. After stopping the engine for 30 min or more, raise and
fix the engine hood.
Remove the oil gauge (1) , and wipe oil off the gauge
with a clean cloth.
Reinsert the oil gauge into the guide tube as far as it
will go, and then take it out.
SMIL15CEXY216AB
1
3. The engine oil level is optimal when the oil level is be-
tween the mark (A) (minimum) and mark (B) (maxi-
mum).
4. If the oil level is at or below the mark (A) (minimum)
on the oil gauge, remove the fill plug (2) and pour in oil
until the level reaches the mark (B) (maximum).
NOTE: Make sure that the oil level is not above the (B)
(maximum) on the oil gauge. Doing so will cause such
problems as poor fuel economy and an abnormal rise in
coolant temperature.
5. Install the fill plug (2) .
SMIL14CEX2746AB
2
6-17